DescriptionAfter installing version a version 9.2 or higher site on a CMS server that was hosting a previous version of Ektron, the workarea reports that no security certificates are found. CauseThe certificates for the older sites may interfere with the new certificates generated for the 9.2 sites.ResolutionThe error messages may persist after the security certificates were generated initially. If the CMS still does not recognize the certificates, it is recommended to regenerate the certifi...

Description If you are receiving the below error during eSync check to see if TLS 1.0 is disabled on the server. The caller was not authenticated by the service. Error executing strategy 'OnAfterESyncRunErrorFromPeer' remotely. Type 'System.ServiceModel.Channels.ReceivedFault' in Assembly 'System.ServiceModel, Version=4.0.0.0, Culture=neutral' is not marked as serializable. Cause TLS 1.0 is required for eSync to function in versions 9.1SP2(including the latest CU for 9.1SP2...

Description.1 duplicate files in either assets, private asset, uploaded images, uploaded files, or templates caused by esync. ResolutionThe short term fix to correcting the .1 duplicate file issue is to delete the .1 and delete the respective knowledge files.If you do not know how to find or delete the knowledge files then please read this knowledge base article on that. ​Out of sync knowledge filesThe long term solution is to update the windows service to 9.0 or higher. You do not have...

DescriptionWhat alias information moves over during a sync with the 9.X branch of the product?ResolutionAuto Aliases With the 9.X branch of the Ektron product, auto-aliases are regenerated during the sync process. This may cause temporary 404 responses on web pages. As such, it's recommended to set up a web site caching strategy, or to sync during 'off-hours' to negate this known behavior. While the auto-aliases are regenerated, their aliasing rules are physically synced over. If you see an ...

Description Assets, private assets, uploaded files, uploaded images, or templates are out of sync, not syncing to/from servers, or load balancing correctly. Resolution If assets, private assets, uploaded files, uploaded images, or templates are not syncing properly, have .1 duplicates, or are not Ektron load balancing (i.e., replicating), the knowledge files may be out of sync. The best way to fix knowledge files is to rename them (or delete them after making a back up) on both ...

Description When a database sync is performed, an alias regeneration process is initiated on the receiving server. If the aliases are not regenerating, an update may fix your issue.  Resolution The below issues are documented for 9.1SP2 and previous versions in the version 9 branch. To address these, upgrade to 9.1SP2 if necessary and apply the latest cumulative site update for 9.1SP2.    Update 5 (November 13, 2015)   23306 - Auto Aliases were not created on production after sy...

DescriptionEsync may experience batch write failures when syncing databases. If that occurs you will see an error similar to the following.Sync (Regular Profile) Errored Out, Error: Ektron.DbSync.Core.RemoteDatabaseSyncException: Database Sync has failed on the remote EWS due to error 'Microsoft.Synchronization.Data.DbSyncException: An unexpected error occurred when applying batch file C:\Program Files (x86)\Ektron\EktronWindowsService40\Database\WebSync_a34ae339f8c1414dbaf1cb0d6525c765\60fe...

DescriptioneSync fails when the Ektron Windows Service does not start correctly.  Debugging shows an exception reading "Service will retry has error System.InvalidOperationException: Cannot swallow exceptions for methods with non-null return type". ResolutioneSync or other service failure with "Cannot swallow" exception in logs. The Ektron Windows Service reads the web.config files of the sites installed locally in IIS.  If one of the URLs in the config file is wrong, the host name cann...

DescriptionYou should purge content on Akami CDN after Sync. ResolutionThis documentation should work the same for eSync Strategies because we have CMS Extension described in the following link. http://documentation.ektron.com/cms400/v9.00/Reference/Web/Developer/extension.htmYou should use an extension to call the Akamai APIs to purge cache information. The following video links shows you how to build an integration into Akami via a CMS extension (plugin) for forward caching capabiliti...

DescriptionWhere are the cloud management knowledge files ResolutionThe cloud knowledge files are located on the local serverThe amazon knowledge files are located on the sync folder called sitename.s3.amazonaws.com, for example c:\sync\Randyv87sp2engtest.s3.amazonaws.com. The knowledge files will be called, bolbsync.id and knowledge.metadata for the cloud folders and filesync.id and knowledge.metadata for the local system.The amazon knowledge files for are in their respective folders t...

Description The following errors are caused by missing or incorrectly applied certificates. Click on sync profile and the Uh ohh error appears. Cryptography error : Exception Details: System.Security.Cryptography.CryptographicException:  The parameter is incorrect.    Sync gets all the way to the end but then fails. Identity Check error:  Exception Details: System.ServiceModel.Security.MessageSecurityException: The identity check failed for the outgoing message. No security cer...

Description When disabling TLS 1.0 some functionality does not work, including esync. Resolution Update: 8/26/2020 A TLS issue was found in 9.1SP3 and 9.2SP2 which prevented rendering of XSLTs when TLS 1.0 was disabled.  9.1 SP3 Fix - Apply CU 53 or higher to 9.1 SP3.  9.2 SP2 Fix - Apply CU 35 or higher to 9.2 SP2.  Update: 5/17/2017 Version 9.2 also has this fix so you can go directly to that version instead of 9.1SP3. For XSLT use 9.2 may be required if https is used.  Update...

DescriptionWhat is the Conflict Resolution policy and how does it work? ResolutionThe conflict resolution policy is applied when a file on both sides of the sync relationship was updated between syncs. For example, there is an hourly sync. A sync occurred at 10:00 AM and completed shortly thereafter. The file on both sides was updated between the completed 10:00 am sync and the 11:00 am sync.The conflict resolution policy updates the content on one side, depending on the choices selecte...

DescriptionWhen setting up a sync relationship between two servers that have multisite, a site dropdown option becomes available that is not present without multisite. This site dropdown can be the difference between content moving or not. ResolutionFor the first sync which creates a sync relationship between servers  make certain to select the "all folders" option in the site drop down. After the sync completes for the "all folders" site option you can create additional sync relationships f...

Description In some cases you may need to free up space on your server or refresh the Ektron Windows Service(EWS) cache. Here are the steps.  Resolution Here are the folders that can be emptied. Stop EWS before clearing the files and start it after completion. If you are using eSync be sure to delete on both sides of the sync. If Ektron load balancing is used, stop EWS on all load balanced servers at the same time, clear the files on all of the load balanced servers, and start...

Description In the sync settings page(workarea > settings > configuration > synchronization > settings) there is a drop down which is typically set to proxy. Also in the drop down are direct and auto-detect. In some cases one type may work where the other does not. For instance, if you see that sync is stuck at 50% you might have an issue with the remote EWS which can be bypassed by switching to the direct type(see below for description).  Resolution Direct - The source Ektron...

Description What is the Ektron L4 log in the Event Viewer Application and Services Logs used for? Resolution The Ektron L4 log is a good log to check if you're attempting the following: Want to know if the Ektron Windows Service is started Knowing when syncs have completed. Generating certificates and the site, or multiple sites, don't appear in the site dropdown Attempting to register a site with Solr or Microsoft Search and receiving an error regarding the Ektron Windows Serv...

Description Using the 9.1SP3 base installer to update an EktronWindowService from 9.X to 9.1Sp3 causes the certificates to be invalid.  Resolution As a work around, in the Ektron.ASM.EktronServices40.exe.config, find these three bindings: wshttpSyncCommunicationScheduleService, wshttpSyncQueueService, and wshttpScheduleServiceBinding. In the message section within those, change the negotiateServiceCredential from false to true.  Related Links Common Certificate errors Up...

Description Below are the steps to enable Ektron Windows Service logging. Resolution 8.0 - 8.02SP5 Edit the following file: C:\Program Files (x86)\Ektron\EktronWindowsService30\Ektron.ASM.EktronServices30.exe.config. Change DebugEnabled to 1.  Open Windows Services. Stop and start the Ektron Windows Services 3.0. The log files can be found here: C:\Program Files (x86)\Ektron\EktronWindowsService30\log. 8.5 and higher Edit the following file: C:\Program Files (x86)\Ektron\Ektr...

DescriptionThe Ektron Windows Service (EWS) has been running without problem but suddenly eSync will not run, and it is soon discovered that the EWS is not starting. CauseThe EktronL4 event log has reached the maximum log size and its properties have been set to Do not overwrite events (Clear logs manually) . ResolutionOpen the Event viewer.Expand the Applications and Services folder.Right-click on the EktronL4 log and select Properties.In the When maximum Change the event log s...

Description Having a fully started Ektron Windows Service helps ensure that your CMS is functioning properly. In some cases the Ektron Windows Service shows as started in the Windows Services window but is actually not fully started. Here is how to confirm that it is fully started and what to do if it is not.  Resolution NOTE: When you need to interact manually with the Ektron Windows Service (EWS), you should "Stop" and "Start" EWS (versus choosing to "Restart" it because somet...

Description Sometimes an esync issue may require deeper logs than what the Ektron Windows Service provides.  In those cases, the Sync Framework Trace logs will be useful for gaining extra information during eSync errors, such as: System.ExceptionThis is a much higher level of logging so ensure there is sufficient space on the drive before doing this. It will also increase CPU usage on the next sync and is only available in 9.1SP2 or higher.  Resolution To enable sync framework ...

Description If at the end of a package sync you see the following error, see the below resolution.  Exception of type 'System.Exception' was thrown. Resolution This may be a problem with how many items are included in a package sync. You may only have one taxonomy in a package, but if it has 100,000 items in it you could see this issue.   To verify if the sync failure is due to the number of items, do the following.  Enable sync framework logging on both sides of the sync  ...

Description Are you seeing the following error despite being absolutely certain you generated security certificates correctly and the service is showing as fully started?  Error generating security certificates. Please make sure that the security configurator has been run and that your security certificates have been properly configured. This issue may also occur if the Ektron Windows Service is not currently running. If so check your event viewers Windows Logs > System/Security logs and...

Description If sync is giving the following remote endpoint error and you have already done the steps in the wsrm:identifier KB, check the Ektron Windows Service logs. The remote endpoint no longer recognizes this sequence. This is most likely due to an abort on the remote endpoint. The value of wsrm:Identifier is not a known Sequence identifier. The reliable session was faulted. If upon checking those logs you find the following error, see below for the resolution. System.Data.SqlClie...

DescriptionSyncing custom tables requires that sync tables are set up properly. In some cases, the sync data needs to be reset to allow that.Resolution Remove the custom table option from the sync profile, then do a sync to confirm that the error goes away.  Remove the custom table from the Manage Custom Table Configuration settings (found on the sync profile page). Remove the custom table's tracking table on the destination side of the sync.  Delete and recreate the custom table on the dest...

DescriptionWhen you try to install Service Update 9.00 SP2, an error occurs: A newer patch update has already been installed on this CMS400 site.  The patch will now close... CauseThe value of InstallVersion in Ektron.ASM.EktronServices40.exe.config is missing 0 in front of the .2. making the installer think it is a higher version. Resolution Go to C:\Program Files (x86)\Ektron\EktronWindowsService40 Edit Ektron.ASM.EktronServices40.exe.config Replace  <add key="InstallVersion...

Description The Ektron Windows Service for versions 9.3 and higher have made a switch to a secured connection by default. This change will lead to issues when older sites are on a CMS server that is running 9.3 or higher by default. If there are issues syncing between two 9.3 sites there might be something within the network blocking communications in which case the following error occurs in the sync status window.  Object reference not set to an instance of an object. This issue could...

Description If sync is automatically restarting after restarting the Ektron Windows Service, see below to prevent that. Resolution Stop the Ektron Windows Service on the syncing servers and any connected load balanced servers.  Select the Top 1000 rows from the scheduler table of the sending and receiving databases.  Look at the scheduledesc tab.  If any of them still show as running when they should be completed, update them as follows.UPDATE SchedulerSET scheduledesc = 'com...